Intercoolers
Blow Off and Diverter Valves
Intercooler Hoses and Accesories
For Turbo Volkswagen
|
|
Click Item Description for More Information!
|
Forge Motorsport
Custom Fit Intercoolers
|
|
Forge Motorsport Front Mount Intercooler Kit for Mk4 Golf/Jetta
Drop intake temps with this Forge front mount intercooler kit. Get more power and greater longetivity! Fits behind stock bumper cover with minor trimming of the cover and modification to the bumper bar.
|
Retail Price: $995
Max PSI Price: $899
|
|
Forge Motorsport Side Mount Intercooler Upgrade for Mk4 Golf/Jetta
If you are looking for increased performance on your chipped 1.8T car but are not ready to upgrade to a full front mount setup, check out the Forge sidemount upgrade. Gains of 13hp were seen on a Forge test car!
|
Retail Price: $599.95
Max PSI Price: $549
|
Forge Motorsport
Universal Intercoolers
|
|
Looking for a quality made intercooler for your car and refuse to accept Chinese junk from Ebay? You owe it to yourself to check out Forge's line of universal intercoolers. Hand crafted in the UK, with polished sheet metal end tanks. These units are truly works of art.
Availabe in a variety of end tank configurations and connection sizes(see links).
|
|
|
Forge Motorsport Universal 100 Series Alloy Intercoolers - 60mm Core
Core dimensions on this unit are 19.69 x 2.37 x 6.89". Overall dimensions will depend on the endtank configuration you choose. Special order, allow two weeks for delivery.
|
Retail Price: $369.95
Max PSI Price: $335 |
|
Universal 200 Series Alloy Intercoolers - 80mm Core
Same as the 100 series core above, but 33% thicker. Core dimensions on this unit are 19.69 x 3.15 x 6.89". Overal dimensions will depend on the endtank configuration you choose. Special order, allow two weeks for delivery.
|
Retail Price: $445.00
Max PSI Price: $399 |
|
Universal 300 Series Alloy Intercoolers - 80mm Core
Core dimensions on this unit are 23.62 x 2.37 x 11.61". VERY LARGE for high power and maximum heat removal. Overal dimensions will depend on the endtank configuration you choose. Special order, allow two weeks for delivery.
|
Retail Price: $565.00
Max PSI Price: $495 |
|
Universal 400 Series Alloy Intercoolers - 80mm Core
Same as the 300 series core above, but 33% thicker. MASSIVE. Core dimensions on this unit are 23.62 x 3.15 x 11.61". Overal dimensions will depend on the endtank configuration you choose. Special order, allow two weeks for delivery.
|
Retail Price: $675.00
Max PSI Price: $625 |
Forge Motorsport
Diverter(Bypass) Valves, Blow Off Valves and Accesories
|
|
NOTE: This is just a small sampling of Forge's more popular valves. If you see something on the Forge Website we didn't list, ask us!
|
|
|
Forge Motorsport FMCL007P - Fast Road Closed Loop Diverter Valve
The classic Forge Diverter Valve. Direct replacement for the plastic Bosch Diverter Valve. This valve has a 1" inlet and outlet to recirculate vented pressure back into the intake. A sure thing for mass air or vane meter equipped cars to ensure no drivability issues. Single Piston design means no blown diaphragms again! Includes spring tuning kit, and installs in minutes! Lifetime Warranty
|
Retail Price: $150.00
Max PSI Price: $135 shipped |
|
Forge Motorsport FMDV001GTI - Single Piston Ram Dump Valve
Forge Motorsport Blow Off Valve. Want that loud WOOSH sound when you let off? This valve is for you. Not for use with Mass Air or Vane Air Equipped Cars. Lifetime Warranty
|
Retail Price: $105.00
Max PSI Price: $95 shipped |
|
Forge Motorsport FMDV004 - Dual Piston Ram Dump Valve
Forge Motorsport Blow Off Valve. Want that loud WOOSH sound when you let off? This valve is for you. Use of dual pistons prevents this valve from allowing unmetered air into the intake tract when used on a Mass Air or Vane Metered car. Click for more info Lifetime Warranty
|
Retail Price: $130.00
Max PSI Price: $115 shipped |
|
Forge Motorsport FMDVRSA - Type RS Valve - Atmospheric
Forge Motorsport Racing Blow Off Valve. The Forge RS valve has been specifically designed and engineered to offer extreme flow rate capability where other valves are just not up to it. Use of dual pistons prevents this valve from allowing unmetered air into the intake tract when used on a Mass Air or Vane Metered car.
Available in standard 25mm(1") or 34mm(1.5") connections.
Click for more info Lifetime Warranty
|
Retail Price: $230.00
Max PSI Price: $205 shipped |
|
Silicone Accessories, Clamps, Etc
|
|
Forge Motorsport Silicone Turbo Inlet Pipes
Have you seen the factory turbo inlet pipe(TIP)? What a peice of work. The bottom half which bolts to the turbo is metal, but is tiny and restrictive with hard bends. The top half which you can see that connects to your air meter is flimsy rubber which has been shown to collapse at high loads closing airflow off to the turbo. Gains of 5hp at the wheels have been seen on totally stock programming, and 12hp at the wheels has been seen on an APR 93 octane chipped vehicle!
|
Retail Price: $190.00
Max PSI Price: $169 shipped |
|
Blow Off or Diverter Valve T Peice
Probably the most useful Silicone peice we've seen in years! These things are great. Want to install a bypass or blow off valve in your intercooler piping, but do not have a connection for it? One of these installs in minutes with no welding or drilling! Simply cut a section out of your hard piping(or install this in place of an existing joint!) , install your valve in the 25mm branch, and tighten down the hose clamps. Voila! You're done! Available in sizes from 1.5" all the way to 3".
|
$29-47
shipped!
|
