 | |||||||
|---|---|---|---|---|---|---|---|
| HOME | SHOPPING | USED STUFF FOR SALE | TECHNICAL VAULT | PROJECT CARS | WHATS NEW? | LINKS | ABOUT US |
| Ford Products |
| Volkswagen Products |
| Click below to email us: |
| boosted_eine@yahoo.com |
| Or Call Us: |
| (407)403-6673 |
|
Max PSI Racing 3" Cat Back and Turbo Back Systems For Jetta with Hidden Tip |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Introducing the Max PSI Racing 3" Cat Back and Turbo Back Systems! Let that turbo flow! Have you chipped your 1.8T powered Golf? Supercharged your VR6? Turbo'd your 2.0? Your next step needs to be an exhaust. Not only will a free flowing 3" system give you more topend power, it will also increase low end torque due to quicker turbo spool! Use of a high quality large case Magnaflow muffler avoids the tinny, "fart pipe" sound. This system features a mellow, deep tone considering the engine size. Outside the sound is agressive, but inside you can still easily carry on a conversation, listen to the radio at reasonable volume, or hear your cell phone. Have concerns of rubbing? Not the case with this system. Use of multiple shallow bends over the axle results in a much more efficient use of the little space available. Our car lowered with a cup kit still has plenty of clearance between the axle and the exhaust. Have concerns of fitment? Dont worry. All pipes are mandrel bent on a CNC mandrel bending machine, and systems are jig welded to ensure consistency. Assembly is easy thanks to the flat stainless band clamps. No messing around with little nuts and bolts on 3 bolt flanges where atleast one is always a pain to get to. No gaskets to blow out and replace either! Simply wrap the clamp loosely around the end of a pipe, butt the two ends together, and tighten down the 9/16" nuts! Once again, note these systems are mandrel bent, not "crush bent" like a system from your local shop. What is "crush bent"? Crush bent is done where a pipe is put between two rollers, and a hydraulic ram pushes in the middle to bend the pipe. Almost all local shops crush bend. The drawback to a crush bent system is the inner diameter of the pipe is greatly reduced at each bend. The average 90 degree crush bend has the flow area of a 2.25" pipe! NOTE: This system is for MkIV Jetta without exhaust cutouts in the rear bumper Listen to the system in action! This is the catback system installed with a Max PSI Racing 3" downpipe and catalytic converter. In Car, 0-85 MPH Blast. For loudness comparison, note that the "tinking" noise at high speed is actually drizzle hitting the windsheild. In Car, 50-75 MPH roll from 2nd to 3rd gear. Outside of car, up close at idle. Outside of car, 50mph driveby and 0-85mph WOT passes. Max PSI Racing 3" catback features:
|
|||||||||