 | |||||||
|---|---|---|---|---|---|---|---|
| HOME | SHOPPING | USED STUFF FOR SALE | TECHNICAL VAULT | PROJECT CARS | WHATS NEW? | LINKS | ABOUT US |
| Ford Products |
| Volkswagen Products |
| Click below to email us: |
| boosted_eine@yahoo.com |
| Or Call Us: |
| (407)403-6673 |
|
Forge Motorsport Silicone Turbo Inlet Pipes |
|||
|---|---|---|---|
|
Forge Motorsport Turbo Inlet Pipes(TIP) Let that turbo flow! As the original developers, engineers and enthusiasts who brought the VAG induction hose line to the market almost 3 years ago, Forge Motorsport is pleased to announce a completely retooled, redesigned, and reengineered range of induction hoses for all VAG 1.8T applications. These hoses have been designed and manufactured with the utmost care given to quality and performance. The silicone compound used in the construction of the hoses is of the highest sheer strength available and is hand-laid with a polyester reinforcement fabric. The layering of the hoses is far more uniform and consistent than of that from any other manufacturer which improves the overall structural integrity of the hoses up to 50%. The internal surface of the hose is completely smooth and unobstructed and the internal volume of this hose has been increased to provide the highest level of airflow at all points within the power band. We have also taken extra care to ensure consistency between each hose produced and that each hose includes all of the necessary ports and provisions required for each engine code and application as have often times been missing on hoses from other manufacturers. Each Forge Motorsport Induction Hose is available in your choice of 3 colors to match the tastes and desired colour themes that you are looking for. Understand all colors may not be in stock with all codes. We will contact you if there will be a wait. Some fitment variations: Available at a nominal additional charge($10) is an adapter to allow the fitment of this hose where the newer style 25mm(1") PCV valves (previously 19mm or 3/4") are installed. Check your PCV valve before ordering! Contact us if you need assistance with this. The PCV is right behind your diverter valve, has a large hose running to it like your diverter valve. It is best to remove and measure the connection on the valve where it goes into the factory TIP. If it is 3/4" diameter, you do not need the adaptor, if it is 1" diameter you do need the adaptor. Alernately, you can check the part number. 06A 129 101 A does not require the adaptor, 06A 129 101 B and C do.
|
Click Images Below For Full Size Pictures
|
||